Can You Drain & Clean a Vinyl Pool?

Cleaning and draining your vinyl pool is not only simple, but also necessary if you want to enjoy a clean pool. There are many reasons why people choose to drain their pools, including cleaning out leaves or algae that may have formed in the water. It’s important to note that draining your vinyl pool is different from draining other types of pools since most vinyl pools require special products and tools in order to do so properly. So, can you drain & clean a vinyl pool? It is recommended that you follow the steps below to ensure that everything goes smoothly before getting started on cleaning out your own vinyl pool:

Do the Groundwork

• Make sure you have the right supplies before you drain your pool.
• Make sure you have a place to store all the water.
• Make sure you have enough time to do it.

Make sure you have the right supplies before you drain your pool.

Before you go any further, make sure you have the following supplies on hand:

• A hose
• A bucket for the water that drains into it. *We recommend using a 5-gallon bucket with a handle.* The bigger the bucket, the less frequent you’ll have to empty it. *If you don’t want to buy an extra bucket, just use your pool’s skimmer basket or net to move water from one place in your pool to another.*
• Pool Skimmer – This is used for removing leaves and other debris from the surface of your vinyl liner so they don’t settle at all! If this isn’t available, either use a brush or net instead—just be careful not to scratch up your liner too much if using either one of these methods instead!

Empty the Pool

Can you drain & clean a vinyl pool? Once the pool is drained, you can begin to clean it. How much time you have and how thorough of a cleaning you want to undertake will determine what tools and materials you will use. If your vinyl pool is in good condition, then simply unhooking the skimmer basket from the suction side of the pump and gently removing any debris that has accumulated on top of it should be sufficient for most people. However, if your vinyl pool has seen better days or if it’s absolutely filthy after years of neglectful owners who didn’t bother to drain their pools before winter came around again (yes, I am looking at *you*), then more drastic measures may be needed.

Once all of its loose leaves and other debris have been removed by hand or with a leaf rake/net combo tool found at most hardware stores—or whatever implements you have available to remove larger debris—it’s time for chemical treatment!

Clean it Out

You can clean your vinyl pool using a hose or a vacuum. Hoses are great for cleaning in larger areas of the pool, but they won’t pick up large debris like leaves and twigs. A good vacuum will have enough suction to pick up all kinds of different materials, including large items like sticks and leaves. If you don’t have access to either one of these tools, any tool with a long handle will do—just make sure it reaches under water at least 3 feet deep before diving in!

Fill Your Pool with Water

Fill your pool with water.

Follow the manufacturer’s instructions when filling your vinyl pool. If you are using a hose to fill the pool, make sure it is clean and free of debris before attaching it to the skimmer box so that you don’t get dirt in your water. Use a pool skimmer to remove debris from the surface of the water as you fill it up.

Can you drain & clean a vinyl pool? Once you have filled your vinyl swimming pool and cleaned out any leaves or other floating matter, take time to clean both filters and pumps using warm water with soap (you can use a dishwashing liquid for this). Make sure that there is no sand or grit left behind in these appliances because this could damage them beyond repair if not removed completely during maintenance chores such as draining and refilling pools with fresh water each year or whenever necessary due to excessive debris buildup in this area of equipment usage within swimming facilities

Maintenance is Key!

Maintenance is the key to keeping your vinyl pool clean and free from damage. You’ll want to:

• Clean the pool regularly
• Clean the pool cover
• Check pH levels of water on a regular basis, ideally once a week. It’s best to check more often during periods of high use or if you suspect an issue with algae growths or leaks in your vinyl pool liner.

Cleaning and draining a vinyl pool is easy, if you have time and follow these steps

Can you drain & clean a vinyl pool? The first step is to plan your cleaning and draining needs. If you have a large vinyl pool, be sure to schedule the job for a time when everyone in your household can help. It will take one person approximately 30 minutes per 50 feet of vinyl liner length to hand clean the pool. This means that if you have a 12 foot round pool with an 8 foot diameter, it will take approximately 4 hours to complete the cleaning process.

When planning on draining and cleaning a vinyl swimming pool by yourself, make sure that you have all of the tools needed before starting. The most important tools are:

• A rubber-handled brush with stiff bristles (a “scrubbing brush”)
• A long pole with a handle on each end; this tool is also known as an “extension pole” or “telescopic pole.”
• A pair of channel locks pliers or Vise-Grips for gripping nuts onto bolts or screws; these work best because they allow you more control during removal of parts from your vinyl liner system than regular pliers do.

Conclusion

The most important thing to remember when cleaning and draining your pool is to do it at the right time. It’s not a good idea to drain your pool in the heat of summer because it will take too long for all that water to evaporate. In addition, wintertime is also not an ideal time because cold water can freeze inside your pipes and cause damage! If possible try doing this work during fall or spring when there are fewer leaves around so they won’t clog up drains as much either