How Long Does It Take To Build a Swimming Pool?

If you’re thinking about installing a swimming pool in your backyard, you’ve probably considered how much time it will take to complete the project. The answer depends on the type of pool that you choose and whether or not there are existing structures around. So, let’s discuss how long it takes to build a swimming pool.

Time to build an in-ground concrete swimming pool

The time it takes to build an in-ground concrete swimming pool will depend on the type of pool you choose. Fiberglass swimming pools are the quickest to install and ready for use within two weeks, while concrete pools take up to seven months before they’re finished.

Concrete swimming pools can be installed in one of several ways, which affects how long they take to complete. Gunite pools are installed just like fiberglass or vinyl-lined ones: by pushing a hose into wet concrete and filling up the area with water until it’s level with the ground surrounding it (this process is called guniting). But gunite is much more expensive because of its superior durability over other types of materials used for lining your pool shell—it lasts up to 10 years longer than polyester resin liners that crack after only five years!

The answer depends on the type of pool you choose

The answer depends on the type of pool you choose. Fiberglass pools arrive at your location prebuilt and require the least digging, while vinyl liner pools are quicker than concrete to install, since they have a smaller hole that requires less digging. They are more expensive than concrete, but they’re also lighter and easier to maintain.

Time for Vinyl liner pools to install

If you’re looking for a quick pool installation, vinyl liner pools are your best bet. In the case of Vinnie’s pool, it only took two days to install and cost about $4,000—which was significantly less than the $8,500 he was quoted by another contractor doing concrete work.

The process is similar regardless of type: The crew will dig out the hole according to spec and install whatever support structure they need (e.g., wooden forms) before laying down a base of sand or gravel so that water can drain away from the pool walls while they’re working on them. Afterward comes backfilling with dirt or sand depending on what kind of surface you want in your backyard; leveling everything out so that it’s flat; installing plumbing lines if necessary; adding any capping materials such as ground-covering stones if desired; then finally laying down your brand new swimming pool!

Installing concrete pools

The most popular pool material for swimming pools is concrete. It’s durable, easy to clean and can be built into any shape or size you want. Concrete pools come in a variety of finishes, including pebble-tec, which has a textured surface that looks like rocks and stones; smooth finish; and trowel finish, which is the most common type of concrete finish on swimming pools.

Concrete pools are also available in three different depths: shallow depth (less than four feet), medium depth (four to six feet) and deep depth (more than six feet). The average cost of a concrete pool ranges from $25 per square foot for a standard round or rectangular above-ground pool; up to $45 per square foot for an unique custom design with multiple levels or curves that requires complex framing techniques plus additional materials such as acrylic liners ($100-$200 per square foot).

A gunite swimming pool

A gunite pool is a concrete shell built on site by spraying layers of concrete over chicken wire to create a shell. The surface is then covered with gunite or pebblecrete, which make the pool more durable than shotcrete. Gunite pools are more expensive than shotcrete, but they’re also more durable, making them suitable for climates that are prone to severe weather conditions or heavy use.

A shotcrete pool

Shotcrete is a type of concrete that is sprayed onto a surface with a hose, instead of being applied with a gun. Because shotcrete applications are done by hand, you can control the thickness and strength of the material very precisely. Shotcreting has long been used in construction work because it’s versatile and gives you complete control over how you apply it. You can use shotcreting to build walls, floors or ceilings (though it’s typically used for building underground structures).

Shotcreting may also be used as an alternative to traditional methods of repairing cracks in existing concrete surfaces. When applied properly, this method will allow you to repair cracks without having to remove any existing materials on site—which saves time and money!

If you have an existing aboveground pool

If you have an existing aboveground pool, you can install an inground vinyl lined or fiberglass swimming pool inside of its walls.

You will need to remove the old pool first, then dig a hole for your new pool. Keep in mind that if you are using an existing deck, it may not be strong enough to support the weight of both your house and a new swimming pool. If this is the case, it might be best to replace it with a new one before installing your new inground liner.

In order for an inground vinyl lining or fiberglass swimming pool to be installed correctly, there must be adequate drainage around its perimeter so water does not pool up on top of its walls. This means digging down at least 12 inches below ground level around all four sides and corners of where your new liner will rest in order for water from rain or snow melt runoff not accumulate around its edge causing damage over time due to freezing temperatures during winter months when temperatures drop below freezing at night (25 degrees Fahrenheit) or high humidity levels during summer days (80% humidity).

Research your options before deciding

When it comes to building your own swimming pool, there are many factors that you should consider before deciding on which type of pool is right for you. You should take into account the size of your backyard, how much money you have budgeted for the project, and what kind of lifestyle you lead. For example, if you have small children at home who love to swim then a kiddie pool may be the best option. However if your family spends most of their time going on vacation or traveling then a large concrete in-ground swimming pool would be better suited to meet their needs. By researching all of these options first hand then they can help guide through this process so that purchasing pre-made parts will not cost too much money or take up too much space in your backyard!

Conclusion

The best way to decide how long it will take to build your swimming pool is by doing research and comparing all of the different types available. This way, you can make an informed decision about which type of pool will work best for your backyard and lifestyle.